液化天然气工厂脱氮工艺分析
责任编辑：cnlng 浏览：172次 时间： 2024-05-08 09:53:48
免职声明：本网站为公益性网站，部分信息来自网络，如果涉及贵网站的知识产权，请及时反馈，我们承诺第一时间删除！
This website is a public welfare website, part of the information from the Internet, if it involves the intellectual property rights of your website, please timely feedback, we promise to delete the first time.
电话Tel: 19550540085: QQ号: 929496072 or 邮箱Email: Lng@vip.qq.com
摘要:摘要以氮摩尔分数小于1%为评价标准,采用阶式混合冷剂制冷循环方式,搭建了节流闪蒸脱氮和汽提塔汽提脱氮2种工艺流程,用Aspen Hysys V8.8过程软件模拟2个流程,通过节点参数和关键参数的分析,得出汽提塔脱氮在能耗比、排出气氮摩尔分数、BOG副产量等方面的优势。同时基..
|
摘要以氮摩尔分数小于1%为评价标准,采用阶式混合冷剂制冷循环方式,搭建了节流闪蒸脱氮和汽提塔汽提脱氮2种工艺流程,用Aspen Hysys V8.8过程软件模拟2个流程,通过节点参数和关键参数的分析,得出汽提塔脱氮在能耗比、排出气氮摩尔分数、BOG副产量等方面的优势。同时基于最小能耗,对应于分子筛再生压力,得出汽提塔汽提脱氮的经济氮含量。With less than 1% of nitrogen content as eva luation criteria, two kinds of technological processes are set, namely,the throttle flash denitrification and stripping denitrification by stripping tower, and simulated by Aspen Hysys V8.8. The results show that the advantages of denitrification in stripping tower are presented in energy consumption ratio, mole fraction of exhausted nitrogen, BOG, and so on, through the analysis of nodal parameters and key parameters. At the same time, based on the minimum energy consumption, corresponding to the regeneration pressure of the molecular sieve, the nitrogen content of stripping denitrification is obtained. |
分享到:
