氮气循环脱水工艺在煤层气制LNG中的应用
责任编辑：cnlng 浏览：166次 时间： 2024-04-22 10:26:21
免职声明：本网站为公益性网站，部分信息来自网络，如果涉及贵网站的知识产权，请及时反馈，我们承诺第一时间删除！
This website is a public welfare website, part of the information from the Internet, if it involves the intellectual property rights of your website, please timely feedback, we promise to delete the first time.
电话Tel: 19550540085: QQ号: 929496072 or 邮箱Email: Lng@vip.qq.com
摘要:摘要煤层气制LNG流程中,含氧煤层气在进入冷箱液化之前,必须进行深度脱水。详述了氮气循环脱水再生工艺流程:采用两台干燥塔,干燥塔装填复合床层吸附剂,利用吸附剂的选择吸附特性,脱除煤层气中的水分及剩余CO2,以满足LNG液化单元要求,利用氮气循环干燥脱水的方法实现干..
|
摘要煤层气制LNG流程中,含氧煤层气在进入冷箱液化之前,必须进行深度脱水。详述了氮气循环脱水再生工艺流程:采用两台干燥塔,干燥塔装填复合床层吸附剂,利用吸附剂的选择吸附特性,脱除煤层气中的水分及剩余CO2,以满足LNG液化单元要求,利用氮气循环干燥脱水的方法实现干燥塔再生。相比传统的干燥塔再生方法,氮气循环再生法能显著降低氮气消耗量,降低整个工艺流程的能耗。在贵州山脚树矿煤层气提纯制LNG项目中,采用氮气循环再生脱水工艺,其氮气的消耗量只有传统工艺氮气消耗量的4.76%,效果良好。In the process of coal-bed methane to LNG production,oxygen-rich coal-bed methane must be deeply dehydrated before entering the cold box for liquefaction.The nitrogen circulating dehydration and regeneration process was described in detail,using two drying towers,drying tower packed with composite bed adsorbent,the use of adsorbent selective adsorption properties to remove the moisture and residual carbon dioxide in the gas to meet the requirements of LNG liquefaction unit,and the use of nitrogen circulation drying dehydration method to achieve drying tower regeneration.Compared with the traditional drying tower regeneration method,nitrogen circulating regeneration process could significantly reduce nitrogen consumption and energy consumption of the entire process.In the project of LNG production by purifying coal-bed methane from Shanjiaoshu Mine in Guizhou,nitrogen circulating regeneration and dehydration process only had 4.76%nitrogen consumption compared with the traditional process,showing quite good effect. 机构地区中煤科工集团重庆研究院有限公司 瓦斯灾害监控与应急技术国家重点实验室 出处《煤化工》 CAS 2018年第2期13-16,共4页Coal Chemical Industry 关键词氮气 循环 煤层气 LNG 脱水 吸附 再生nitrogen circulation coal-bed methane LNG drying adsorption regeneration 分类号 TD712.67 [矿业工程—矿井通风与安全]
|
分享到:
